Solar heating or heat pump: how to heat your pool without making mistakes?

You would like to save a few weeks of swimming without your pool becoming the second heating source in the house. One salesperson talks to you about a heat pump. Another suggests solar sensors. And your neighbor claims that a simple cover will suffice. Who should you believe?

The three of them don’t exactly have the same role. Some equipment adds heat to the water, while others mainly prevent it from escaping. To choose wisely, you first need to understand your habits, your region, and the temperature you hope to achieve.

Before heating up, ask yourself what you really want.

Do you want to go from 22 to 25 °C for a few pleasant days? Or keep it at 28 °C almost every day, even when the nights are cool? These two projects have neither the same consumption nor the same equipment requirements.

To make a first estimate, consider this physical relationship: heating a cubic meter of water by one degree requires about 1.16 kWh of heat. A 30 m³ swimming pool therefore requires about 34.8 kWh of thermal energy to gain one degree, not counting the losses during heating.

This is not an electric bill. It is the amount of heat to be transferred to the water. The difference is significant, because a heat pump can provide several kilowatt-hours of heat for a kilowatt-hour of electricity consumed, depending on the conditions. With a simple electric heater, the ratio is much closer to one.

The heat pump: relatively controllable heat

A pool heat pump recovers part of the energy from the outdoor air and transmits it to the water. This is often the solution when you want to program a temperature and extend the swimming season without relying solely on instantaneous sunlight.

Its efficiency is described by a performance coefficient, the COP. A COP of four means that, under the declared measurement conditions, the device provides four units of heat for one unit of electricity. But this figure changes with the temperature of the air and water. The value highlighted in an advertisement is therefore not a guarantee for your April mornings.

The pump requires an appropriate power supply, a compatible hydraulic circuit, and good air circulation. It produces noise and condensation. We have already detailed these aspects in our guide on the location of a heat pump.

Solar heating: heat when the sun is there

With thermal solar sensors adapted to swimming pools, the water circulates in a circuit that recovers heat from the sun. The system can be simple in principle, but its efficiency depends heavily on the surface area of the sensors, their exposure, flow rate, and weather conditions.

The Federation of Swimming Pool and Spa Professionals cites solar heating as one of the available solutions, while recalling that it is variable depending on the sun exposure. In a very sunny region, it may be interesting. In a garden surrounded by trees or a valley often covered in snow in the spring, the results will be different.

Solar heating is not synonymous with completely free electricity: depending on the installation, a circulation pump, a control system and valves can consume energy. Proper calculation must take into account the equipment, installation, maintenance and energy required for circulation.

Another subtlety: thermal solar sensors are not photovoltaic panels. The first heat a fluid directly; the second produce electricity that can eventually power other equipment. They do not fulfill the same role.

The electric heater: compact, but be careful how you use it

An electric heater uses a resistance to heat the water. It can be compact and convenient for small volumes or certain occasional uses. But the energy required remains significant when heating several tens of cubic meters.

Let’s take 30 m³ and a degree of increase. It takes about 34.8 kWh of heat. In the simplified scenario of a heater delivering almost as much heat as the electricity consumed, this represents about 34.8 kWh of electricity, excluding losses.

With a heat pump displaying an effective COP of four under the same conditions, the corresponding theoretical input would be approximately 8.7 kWh of electricity. The actual COP may be different; these figures are only used to compare the principles, not to promise a specific cost.

The cover: the equipment that is too often forgotten

You can have an excellent heating system and lose some of the heat during the night. Evaporation at the surface of the pool is a significant source of losses. Proper coverage helps to limit this phenomenon when no one is bathing.

The FPP highlights the importance of thermal covers, shutters and shelters to maintain the temperature of the water. A properly chosen safety shutter can have several functions, but a simple bubble wrap should not be confused with a regulatory protection device.

Before investing in a more powerful pump, take a look at your usage pattern. A swimming pool uncovered in the wind doesn’t behave like a protected basin during cool nights. The cover doesn’t necessarily create heat; it mainly prevents you from losing it unnecessarily.

Can solar and heat pump be combined?

Yes, subject to an appropriate design. Solar energy can help to heat water when conditions are favorable, while a heat pump takes over if a set temperature is desired. However, proper regulation and connections must be provided to avoid excessive flow rates and unnecessary operation.

Over-equipment is not necessarily cost-effective. If you swim mainly in July and August and the water suits you already, a cover may suffice. For regular use from spring to autumn, a more comprehensive solution may prove of real interest.

How to compare quotes without being put off?

First, ask about the target water temperature, the operating period, and the climatic assumptions used. A product advertised as capable of heating a 40 m³ basin in July will not necessarily provide the same result in April.

For a heat pump, compare the thermal power and COP at the same test temperatures, as well as the noise, possible defrosting, and the reported consumption. For solar thermal, look at the surface area, orientation, load losses, and control. For all of them, check the warranties and access to maintenance.

Don’t forget the cost of installation and any modifications to the technical area. A cheap machine may require significant connection work. Conversely, expensive equipment is not automatically relevant for a pool that is not used much.

An example without a miracle promise

Imagine two families with the same 30 m³ pool. The first family lives near Montpellier, covers the pool every evening and swims in it mainly from June to September. The second family is in the northeast, wants 27 °C from April and regularly leaves the pool uncovered.

The first can consider a solar solution or a heat pump sized for relatively modest use. The second will need to assess a need for more significant heating. The difference comes from both the bathing season and the water volume.

If you want to estimate the cost of water circulation, our article on the electrical consumption of the filtration pump explains how to calculate kilowatt-hours based on power and operating time.

The right question to ask the seller

Rather than asking «Which device is the most powerful?», ask: «What temperature can I reasonably achieve at home, at what times and with what predictable consumption?» Demand clear assumptions, appropriate coverage and a comprehensive quote.

The choice is not a race to have the biggest fan or the largest solar panel. It’s a balance between comfort, weather, budget, and maintenance. Your pool doesn’t need to look like a spa in April to be enjoyable. It should primarily correspond to how you actually plan to use it.

Sources

FPP: heating your pool, solar heating, heat pump and cover ; FPP: heating solutions for an existing swimming pool. The quantified comparisons in this article are simplified physical calculations, not guaranteed savings.

en_GB