You have a swimming pool, a filtration pump that runs for several hours a day, and somewhere in the garden there is a small technical room where no one really goes unless everything is working properly.
Then comes the electricity bill.
And here's a question: how much does this pump that quietly whirrs behind the house cost?
50 € per season? 200 €? More?
The answer depends on three fairly simple things: the electrical power of your pump, its operating time, and the price of your electricity.
Good news: No need to call an electrician to get an initial estimate.
And you might discover that a small change in your habits makes a real difference over the season.
First reflex: check the power of your pump
Go take a look at the plaque on the filtration pump.
You will normally find several technical information there: voltage, intensity, power and reference of the model.
What interests us here is the electrical power consumed, expressed in watts (W) or kilowatts (kW).
Be careful not to confuse the electrical power absorbed with the engine's mechanical power. A figure in horsepower, for example, is not always enough to know the actual consumption.
If the plaque is not clear enough, look for the technical specifications for your model.
For our example, let's imagine a pump that consumes 750 watts in operation.
This corresponds to 0.75 kilowatt.
And now, we're going to do a little calculation.
How much does a day of filtration cost?
Suppose your 750-watt pump runs ten hours a day.
She then consumes:
0.75 kW × 10 hours = 7.5 kWh per day.
In France, as of August 1st, 2026, the regulated price of electricity in the Base option for a residential contract of 6 kVA was €0.2001 TTC per kilowatt-hour.
This is the rate we will use for our simulation, although the actual price depends on your contract.
EDF publishes this tariff grid on its website and reminds that the consumption of a pump is calculated based on its power and the duration of use.
Our example therefore gives:
7.5 × 0.2001 € = 1.50 € per day, approximately.
Nothing to panic about.
But over an entire season, it starts to count.
Over five months, the bill is less significant.
Imagine that you use your pool for 150 days, with an average of ten hours of filtration per day.
A 750 W pump then consumes 1,125 kWh over 150 days, or 225,11 € at the rate charged. This is a scenario, not a national average, and this amount excludes the subscription fee, heating and other equipment.
Here is a more telling figure.
And if your pump runs twelve hours a day instead of ten, with the same other assumptions, the cost goes up to about €270 over 150 days.
The difference is far from negligible.
But that doesn’t mean that filtration should be reduced to six hours immediately.
Because poorly filtered water can quickly lead to you spending more on treatment products and interventions.
Can the filtration hours be reduced?
Yes, sometimes.
But not in any way that’s not good.
You may have already heard this rule: take the water temperature and divide it by two to obtain an indicative filtration time.
For example, at 24 °C, this would give twelve hours per day.
This is a practical reference that can be found in some advice intended for pool owners.
But this is not a universal technical requirement.
The good filtration time also depends on the pump flow rate, the volume of the basin, the frequency of use, the temperature, the sunlight, and the treatment used.
EDF recommends adapting the filtration time to the conditions of use rather than systematically leaving the pump running at the same speed.
A swimming pool that is used daily by the whole family, with water at 29 °C, obviously does not have the same needs as a small, covered pool that is not used very often.
The goal is not to filter as little as possible. The goal is to filter enough, without wasting electricity.
And if you change the programming, then carefully check the water quality.
A variable-speed pump can change the game
Here is an interesting piece of equipment when you think about the consumption of your pool.
A conventional pump generally operates at a fixed speed when it is running.
A variable-speed pump, on the other hand, can adapt its rotation speed to the needs.
This is useful because normal filtration does not necessarily require the same flow rate as a filter backflush or certain cleaning operations.
By reducing the speed, an appropriate pump can greatly reduce its instantaneous electrical power.
A technical guide published by FEDENE in October 2022 explains that controllers allow for optimizing the electric consumption of pumps, notably by adapting their speed to different operating phases. The document primarily concerns public swimming pools, but the technical principle remains relevant for understanding residential equipment.
Attention, however.
A variable-speed pump is not automatically more economical in all configurations.
The operating time, the actual power absorbed, and the requirements of the hydraulic circuit must also be taken into account.
An example to understand
Imagine two installations operating ten hours a day for 150 days.
The first consumes 750 watts.
The second, in an adapted configuration, consumes an average of 450 watts during those same hours.
At €0.2001/kWh, the first one represents 225,11 € electricity for the season and the second 135,07 €. The difference reaches approximately 90 €.
Of course, this calculation does not prove that a variable-speed pump will save you exactly that amount. It simply shows the effect of reducing the average power over an equal duration.
Before buying, compare the cost of the equipment, the installation, and the realistic savings on your pond.
And are empty hours worth it?
That could be interesting.
If your contract provides for full hours and part-time hours, the price of electricity changes according to the time slots.
Scheduling part of the filtration during cheaper hours can reduce the bill.
But there are two limitations.
First, you need to check your actual schedules with your provider.
Then, it would not be appropriate to move all the filtration overnight just to save a few euros if your pool needs to operate during the hot and busy periods.
A good solution sometimes consists of distributing the filtration over different time slots.
We cannot sacrifice the quality of the water in order to benefit from an electricity tariff.
Heating can weigh much more than filtration
So far, we have only talked about the pump.
But if your pool is heated, the calculation becomes more interesting.
A heat pump, for example, consumes electricity to transfer heat to the water.
Its consumption depends, in particular, on the outdoor temperature, the desired temperature for the basin, its efficiency, and thermal losses.
In other words, heating a pool to 25 °C for a period of time is not the same thing as trying to maintain 29 °C when it’s cold at night.
EDF also details the differences in consumption between various pool heating solutions.
The first reflex to limit losses is not necessarily to change the heat pump.
It is often to cover the basin when no one is swimming.
A cover can save water and energy
You probably already know the benefits of a tarp or a roller blind to limit dirt.
But the effect on evaporation is also important.
The Federation of Swimming and Spa Professionals indicates that a cover or shelter can greatly reduce evaporation, with reported results between 50% and 95% depending on the type of protection and conditions.
Less evaporation means less water to add.
And for a heated pool, limiting evaporation also helps to reduce heat loss.
It is not an identical economy for everyone: it depends on the climate, the wind, the use, and the coverage chosen.
But it’s a good topic to consider before buying more expensive equipment.
How much does the added water cost each year?
The 8×4-meter swimming pool is a good example.
The Federation of Swimming and Spa Professionals indicates that such a pool uses an average of about 7 m³ of water per year, according to the assumptions presented in its guide on water-saving swimming pools.
To know how much that amounts to in your home, you need to look at the price per cubic meter on your water bill.
Let's take a purely illustrative price of 4 € per m³.
Seven cubic meters would cost €28.
But the exact cost depends on your municipality and the applicable pricing.
It can also vary depending on water runoff, evaporation, rainfall, and how you maintain your pool.
By the way, if the heavy rains have raised your water level, our article on the Pool too full after the rain explains how to react without performing an unnecessary drain.
My advice: start by measuring before buying
Are you being offered a state-of-the-art pump that is supposed to reduce your bill?
Before you pull out your credit card, collect three pieces of information.
The actual electrical power of your current pump. The number of hours it operates. And the price of a kilowatt-hour on your bill.
With these three figures, you can already estimate the annual cost of your filtration.
To go further, a dedicated electric meter, installed under compliant conditions, can provide a truly measured consumption.
You will then be able to compare several programming options or equipment without relying solely on commercial promises.
And to assess the total costs, check out our guide on Overall budget for a swimming pool.
A swimming pool inevitably consumes electricity and water. But knowing the actual figures often makes it possible to do better, without turning your vacation into a chore of accounting.
Sources
EDF – Kilowatt price in 2026 : reference price of the simulation.
EDF – Electricity consumption of a swimming pool Consumption calculation and main equipment.
Federation of Swimming and Spa Professionals – Water-efficient Swimming Pool.