You have just bought a heat pump for your pool. It has arrived, it looks beautiful, and it promises to heat the water without blowing up the electricity bill.
It remains to find a place for him.
Behind the garage? Against the fence? Next to the technical room?
One might think that it’s just a matter of pipes and a few square meters of available space.
Except that a poorly installed heat pump can become quite annoying. It heats less well, makes more noise, or sends cold air directly onto the terrace.
And sometimes it’s the neighbor who comes to explain the problem to you.
Here's how to choose a location that really works, without turning your garden into a technical facility.
A heat pump needs to breathe
Let’s start by understanding what’s going on in this big box equipped with a fan.
A pool heat pump recovers energy from the outdoor air to transfer it to the water in the pool.
This allows it to provide more heat than the electrical energy it consumes under suitable operating conditions.
The Federation of Swimming Pool and Spa Professionals explains this principle in its guide on heating swimming pools.
But to recover this energy, the machine must circulate a lot of air.
It draws in ambient air, extracts some of the heat from it, and then rejects a cooler air.
You now understand why pinning it between three walls isn’t necessarily a good idea.
The air must be able to enter and exit freely.
A heat pump is not a garden furniture that you can simply push into the first available corner.
The trap of the small space behind the garage
Imagine a housing development.
There is a passage of fifty meters between the garage and the fence.
It’s discreet, no one will see the pump. The place seems perfect.
Except that the fan might blow directly against a wall.
The cold air may then not be able to escape and return to the device.
The result: less favorable operating conditions, and potentially degraded performance.
Zodiac recommends, in its installation instructions, that a clear space be kept in front of the fan. The manufacturer mentions, in particular, a free area of five meters for certain configurations.
This distance corresponds to its technical recommendations and is not a universal requirement applicable to all models.
Some pumps blow horizontally, others vertically.
The necessary clearances may therefore change.
Before choosing your location, check the instructions for the exact model you plan to install.
And if you want to hide the machine behind a cabinet or wooden cladding, make sure that this decoration does not block the flow of air.
It would be a shame to buy a high-performance pump and then lock it away in a pretty box.
The noise: also think about the neighbor's terrace
A heat pump produces noise.
There is the fan noise, the compressor noise and sometimes vibrations transmitted to the support.
Depending on the model and its operating mode, these noises can be more or less noticeable.
The problem is that a discreet location from your terrace can be much less pleasant from the neighbor’s terrace.
Let's take an example.
You place the pump at the bottom of the garden, behind a hedge.
On your side, it is almost invisible.
But just behind the fence is the neighbor's room.
And the fan runs for several hours on beautiful spring days.
You see the problem.
The French Association for Heat Pumps recommends, in particular, anticipating the acoustics from the choice of the location, avoiding surfaces that reflect sound and limiting the transmission of vibrations.
Is there a mandatory distance from the neighbor?
It is regularly read that the heat pump should be installed three meters from the property boundary.
Be careful with this statement.
There is no single national distance that applies to all domestic heat pumps. However, local urban planning or zoning regulations may impose constraints.
On the other hand, the noise produced must not disturb the peace of the neighborhood.
This is the principle laid down by Article R1336-5 of the Public Health Code.
The sound threshold levels sometimes mentioned in the guides relate to specific categories of activities. They should not be applied automatically to any domestic heat pump.
The good rule of thumb remains fairly simple: keep the device away from windows and resting areas when possible.
And talking about the project with the neighbor before moving in can avoid some unpleasant discussions in July.
On what to place the heat pump?
On a stable surface.
It seems obvious, but a heat pump placed directly on movable ground or poorly aligned slabs can quickly become problematic.
The ground moves, vibrations increase and connections can be subjected to stress.
An adapted slab, a support designed for the equipment, or specific brackets may be suitable according to the manufacturer’s recommendations.
The important thing is to have a solid, horizontal surface that can support the weight of the machine.
Anti-vibration devices recommended must also be provided.
These are usually small, flexible supports that limit the transmission of vibrations.
They do not make a pump completely silent, but can contribute to acoustic comfort.
Another detail: avoid placing the machine in an area that is regularly flooded or exposed to the projections of an automatic irrigation system.
A pool heat pump is designed to operate outdoors, not to take a daily shower with tomatoes.
Why do we sometimes find water under the pump?
You have installed your equipment; everything works.
And a few hours later, you discover a puddle under the machine.
First thought: a leak!
Not necessarily.
When it works, a heat pump can produce condensation water.
The moisture present in the air condenses when it comes into contact with certain cold parts of the device.
Zodiac indicates that several liters of water can thus be produced daily, depending on the conditions.
Therefore, an appropriate evacuation must be planned.
If the pump is located on the edge of a terrace, it is better to avoid the water flowing continuously into the passage.
However, if you notice an abnormal amount of water or if the flow continues when the device is turned off, have the source of the problem checked.
Not all puddles are condensation.
Closer to the pool, it must be better?
Not exactly.
A heat pump must be connected to the hydraulic filtration circuit.
In a conventional installation, the water passes through the filtration system before flowing into the heating device, then returns to the basin.
The configuration depends on the equipment installed.
A drainage system, often called by-pass, This can help regulate the flow of water in the heat pump.
Zodiac details this operation in its commissioning instructions.
It is therefore interesting to plan a location that does not require unnecessary lengths of pipes.
But that doesn’t mean the pump has to be placed as close to the edges as possible.
The electrical safety distances must be respected.
The connections must also remain accessible and properly sized.
The right location is one that combines good air circulation, acoustic tranquility, security, and convenient connections.
If you are planning a new swimming pool, take advantage of this opportunity to incorporate these constraints into the installation plan from the very beginning.
Our article on Things to check before building a swimming pool It can also help you.
Does a well-placed pump heat up faster?
It can mainly operate in better conditions.
The efficiency of a heat pump depends, among other things, on the temperature of the outdoor air and the operating conditions.
The colder the air, the more difficult it can be to recover enough heat to quickly reach the desired temperature.
Manufacturers usually publish their performance results for several test conditions.
That is why comparing the performance coefficient only announced in two commercial brochures can be misleading.
Check the air and water temperatures used for the measurements.
And keep in mind that a heat pump does not always effectively compensate for the heat losses from a swimming pool left uncovered during cold nights.
Appropriate coverage can help limit these losses.
To understand the other operating expenses, see our article on The cost of filtering a swimming pool.
Can we build a small shelter around it?
It’s tempting.
The pump isn’t very pretty, so you’re considering a wooden chest of drawers to match the terrace.
Why not, provided that the outfit is compatible with the model.
But beware: a trunk that is too tightly closed can interfere with ventilation and complicate maintenance.
Heat, humidity and vibrations must also be taken into account.
A simple claustra placed at a good distance can sometimes be more suitable than a closed box.
In all cases, have the installation contractor validate the layout.
A nice finish should not prevent the machine from functioning properly.
Checks to be done before choosing the location
Before laying a slab or ordering the fittings, take the time to look at your garden.
Imagine the pump operating for several hours.
Where will the cold air go? Where will we hear the fan? Is the neighbor’s terrace just behind?
Then check that the device will remain accessible for cleaning and technical interventions.
Zodiac recommends, in particular, regularly checking the cleanliness of the grilles and the evaporator, and arranging for appropriate technical maintenance.
Finally, have the applicable urban planning rules confirmed with your municipality. Depending on the configuration of the installation and the modifications made to the building or the land, some formalities may be required.
One last thing before taking out the drill
A pool heat pump can significantly improve the comfort of swimming.
But its location deserves almost as much attention as the choice of model.
It is better to spend half an hour thinking about distances, noise, and connections than to discover after installation that the fan blows directly onto the sun loungers.
And if the dog comes and steals your glove while you’re taking the measurements, just consider that it’s part of the project.
In his own way.
Sources and references
To learn more: Federation of Swimming and Spa Professionals (heating of swimming pools); French Association for Heat Pumps (acoustic recommendations); Public Health Code, Article R1336-5 (noise from the neighborhood). For clearance distances, maintenance and connections, please also consult the manufacturer’s instructions for the heat pump, in particular Zodiac Pool Care. The instructions vary depending on the model.